Newland HR42 Halibut User Manual Download Page 51

Page: 51 / 222

Enter Setup

** Exit Setup

Default Settings

Factory Defaults

Scanning the following barcode can restore the scanner to the factory defaults.

You may need to reset all parameters to the factory defaults when:



scanner is not properly configured so that it fails to decode barcodes.



you forget previous configuration and want to avoid its impact.

Restore All Factory Defaults

Custom Defaults

Scanning the

Restore All Custom Defaults

barcode can reset all parameters to the custom defaults. Scanning the

Save

as Custom Defaults

barcode can set the current settings as custom defaults.

Custom defaults are stored in the non-volatile memory.

Save as Custom Defaults

Restore All Custom Defaults

Restoring the scanner to the factory defaults will not remove the custom defaults from the scanner.

Summary of Contents for HR42 Halibut































































































































































































































Search results

Summary of Contents for HR42 Halibut

Reviews:

Related manuals for HR42 Halibut

Brands by name

Popular brands

Newland HR42 Halibut, User Manual

Search results

Summary of Contents for HR42 Halibut

Reviews:

Related manuals for HR42 Halibut

Brands by name

Popular brands