Newland HR42 Halibut, User Manual

Page: 25 / 222

11
Scanning Instructions
When the scanner is in the Manual scan mode, you can follow the steps below to scan a barcode:
1. Press and hold the trigger. Then the scanner will project a redaiming beam.
2. Aim the red beam across the center of barcode, as shown in the figure below.
3. Release the trigger when the red beam goes off. If the barcode is decoded successfully, the scanner will emit a good
decode beep and the decoded data will be sent to the host device.
Note: For barcodes of the same batch, the scanner keeps a high success ratio in certain distance which is regarded as the
optimal scanning distance.