Enter Setup
** Exit Setup
168
Step 3:
Select data format.
Scan a numeric barcode
0
or
1
or
2
or
3
to set this to Format_0 or Format_1 or Format_2 or Format_3.
Step 4:
Select formatter command type.
Specify what type of formatter commands will be used. Scan a numeric barcode “6” to select formatter command type 6.
(See the “Formatter Command Type 6” section in this chapter for more information)
Step 5:
Set interface type
Scan
999
for any interface type.
Step 6:
Set Symbology ID Number
Refer to the “Symbology ID Number” section in Appendix and find the ID number of the symbology to which you want to
apply the data format. Scan three numeric barcodes for the symbology ID number. If you wish to create a data format for all
symbologies, scan
999
.
Step 7:
Set barcode data length
Specify what length of data will be acceptable for this symbology. Scan the four numeric barcodes that represent the data
length. 9999 is a universal number, indicating all lengths. For example, 32 characters should be entered as 0032.
Step 8:
Enter formatter command
Refer to the “Formatter Command Type 6” section in this chapter. Scan the alphanumeric barcodes that represent the
command you need to edit data. For example, when a command is F141, you should scan F141. A command can contain
up to 500 characters.
Step 9:
Scan the
Save
barcode from the “Save/Cancel Barcodes” section in Appendix to save your data format.
Example:
Program format_0 using formatter command type 6, Code 128 containing 10 characters applicable, send all
characters followed by “A”.
1. Scan the
Enter Setup
barcode Enter the Setup mode
2. Scan the
Add Data Format
barcode Add a data format
3. Scan the
0
barcode Select format_0
4. Scan the
6
barcode Select formatter command type 6
5. Scan the
9
barcode three times All interface types applicable
6. Scan the barcodes
002
Only Code 128 applicable
7. Scan the barcodes
0010
Only a length of 10 characters applicable
8. Scan the alphanumeric barcodes
F141
Send all characters followed by “A” (HEX: 41)
9. Scan the
Save
barcode Save the data format
Summary of Contents for HR42 Halibut
