NEW BRUNSWICK SCIENTIFIC BioFlo 4500, Manual To Operations

Page: 76 / 214

BioFlo 4500 M1254-0050 User’s Guide
76
8. To set the limits of the control loop, touch the
LOW
text box, then enter the
desired values using the onscreen keypad. Press
OK
to accept the settings.
Do the same to set the high limit in the
HIGH
text box.
9. To configure the input device, press the
INPUT DEVICE ICON
. The
SELECT
INPUT DEVICE SCREEN
will appear.
10. Select the
INPUT TYPE
and
CONNECTOR ID
by pressing on the selections you
wish to use. The
CONNECTOR ID WINDOW
will only display available inputs.
If an input is already allocated to another device, it will not be displayed.
11. Touch
OK
to accept your selections.
12. Select the
CONTROLLER ICON
to set the controller characteristics for this
loop, i.e., how it will respond to differences between setpoint and current
value. The
CONTROLLER SETTINGS SCREEN
will appear.