NEW BRUNSWICK SCIENTIFIC BioFlo 4500, Manual To Operations

Page: 171 / 214

New Brunswick Scientific Co., Inc. User’s Guide
171
NOTE
:
The sterilization parameters have been preconfigured at the factory.
The operator may make changes to the sterilization parameters by
following the instructions below.
The factory set sterilization parameters are the shown below:
28.1.1 Resetting Sterilization Parameters
Enter the parameters by pressing on any of the text boxes and entering the
values on the keyboard. Press
OK
to accept the parameters. The
parameters are as follows:
•
STER TEMP Sterilization Temperature, range:
0
°
C - 130
°
C.
•
HEAT B TEMP Temperature at which steam is
allowed to directly enter the
vessel, in
°
C. The valve must be
less than or equal to (
≤
) the
STER
TEMP
.
•
DRAIN TIME Drain Time, range: 0-500 minutes.
At the factory it is set to 0.
45