NEW BRUNSWICK SCIENTIFIC BioFlo 4500, Manual To Operations

Page: 140 / 214

BioFlo 4500 M1254-0050 User’s Guide
140
20.1 Internal Floppy Drive
On units equipped with an internal computer, there is a floppy drive mounted
inside the console. To gain access to this drive:
1. Turn the unit off by setting the power switch in the Off position.
Figure 35: Side Panel Removal
3. Lift and slide the panel from the console. The floppy drive should be visible.
It is mounted so that the face of the drive is facing down.
4. Reconnect the power cord and turn the unit on.
5. Insert a diskette into the drive, and follow the procedures to save or to load a
configuration file.
6. Remove the diskette when finished.
7. Replace the panel on the console and secure it in place with the two screws.
2. Remove the two
screws that hold the
right (facing front)
side panel to the
console.