NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2
84
The NV-600WI can support up to a maximum of 16 WAN connections in system. When hardware based QoS is enabled in system, it
limits the number of VCCs to 8 only for ATM based WAN. For creating a new WAN connection, click
Add
in the WAN setting page.
Please follow the rest of the steps for creating the WAN connection.
The last column named DEFAULT GATEWAY allows selecting the WAN for relevant WAN mode setting in WAN setting web page.
When the user clicks any of the radio buttons, he will be asked to confirm the same. If the user clicks
Apply
, the default gateway will
be configured on the selected WAN connection; otherwise the changes will not be applied.
The screen contains the following details:
Fields in WAN Settings:
Field
Description
Auto Detect Enable
To enable Auto Detect.
WAN Number
The configured WAN are referred through auto-assigned names in form
WANIP<No.> or WANPPP<No.> where <No.> start from 0.
WAN Channel
Provides information of layer-2 WAN channel configured.
Type
Provides information about type of WAN such as PPPoE or DHCP or Bridged etc.
Default VoIP Interface
This option is present only in IAD models, where VoIP is supported. This is the
default interface for VoIP packets.
Default Gateway
This option allows configuring default route in system. The chosen WAN will be
used for default route.
When you click
Add
button in WAN Settings web page, a screen is displayed as shown in
Figure 4.6.5.2
