netsys NV-600WI User Manual Download Page 55

Page: 55 / 253

NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2

Restore Previous Backed-up Configuration

As mentioned before this option allows the user to restore the earlier backed up configuration in router system. This operation is

handy for restoring the system to last backed-up configuration mode. The Local Host Configuration restore is shown in

Figure 4.3.6.2

The system will reboot after the configuration is restored. When the CPE boots up, it will be running with the newly applied

configuration.

Figure 4.3.6.2 Configuration Restore

Click

Apply

button to restore the configuration settings.

Summary of Contents for NV-600WI






























































































































































































































































Search results

Summary of Contents for NV-600WI

Reviews:

Related manuals for NV-600WI

Brands by name

Popular brands

netsys NV-600WI, User Manual

Search results

Summary of Contents for NV-600WI

Reviews:

Related manuals for NV-600WI

Brands by name

Popular brands