NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2
45
4.3.1 Host Name Configuration
To configure the host name of NV-600WI, you have to enter host and domain name. Click the
Host Name Config
link (
System >
Host Name Config)
on the left navigation bar. A screen is displayed as shown in
Figure 4.3.1
.
Figure 4.3.1 Host Name Configuration
Fields in Host Name Configuration
Field
Description
Host Name
Enter the host name of the VDSL2 CPE. This is used to address VDSL2 CPE, by using this name instead of
typing the IP address. Maximum Characters: 60.
Domain Name
Enter the domain name of the VDSL2 CPE. Maximum Characters: 60.
Click
Apply
at any time during configuration to save the information that you have entered.
Click
Cancel
to exit from this page without saving the changes.
