NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2
73
4.6.2 Auto Detect Setting
Auto detect feature is a fully automatic way to find and configure the VC channel or VLAN channel for active WAN PHY of the device
and WAN protocol for the same (either PPPoE/DHCP).
User has to provide pool of VC channels or VLAN channels which will be probed one by one sequentially and upon successful
detection of a channel, WAN protocol probing will be done and configured in the device.
For configuring the
Auto Detect Config
, click
Auto Detect Config
(
WAN > Auto Detect Config
) on the left navigation bar. A
screen is displayed as shown in
Figure 4.6.2
Figure 4.6.2 Port Mapping Configuration
