netsys NV-600WI User Manual Download Page 105

Page: 105 / 253

NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2

104

The screen contains the following details:

Fields in DDNS:

Field

Description

Enable DDNS support

Check box to enable DDNS support in CPE.

WAN Interface

WAN Interface name from dropdown for DDNS resolution. The DDNS agent running in CPE

keeps track of changes in IP address of chosen WAN and informs DNS service provider.

DDNS Server

Dynamic DNS Server Provider.

Host Name

Host name registered with DDNS Service provider. This is part of FQDN used for accessing

the host.

User Name

Registered user name with DDNS service provider.

Password

Registered password with DDNS service provider.

Click

Apply

for applying the DDNS changes into system.

Click

Cancel

to exit from this page without saving the changes.

Summary of Contents for NV-600WI






























































































































































































































































Search results

Summary of Contents for NV-600WI

Reviews:

Related manuals for NV-600WI

Brands by name

Popular brands

netsys NV-600WI, User Manual

Search results

Summary of Contents for NV-600WI

Reviews:

Related manuals for NV-600WI

Brands by name

Popular brands