NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2
218
The screen contains the following details:
Fields in DS-Lite Configuration:
Field
Description
General Settings
Enable DS-Lite tunnel
To enable/disable DS-Lite functionality in CPE.
WAN Interface
Select WAN interface from dropdown on which DS-Lite tunnel has to be
created.
Configuration Modes
Modes to configure DS-Lite tunnel on a WAN interface. Currently, Static,
Dynamic (DHCPv6 option-64) and Lw4o6 DS-Lite modes are supported.
MTU
It is used to specify Maximum Transfer Unit size for DS-Lite tunnel.
Static Parameters
DS-Lite Remote IPv6 address
IPv6 address of the remote tunnel endpoint. (When you select Dynamic
mode, this field is disabled.)
DS-Lite tunnel IP address (IPv4)
IPv4 address of the remote tunnel endpoint.
Subnet Mask
IPv4 Address subnet mask.
Lw4o6 Port Range
This is the port range for Source NAT. Applicable only for Lw4o6 type.
Click
Apply
at any time during configuration to save the information that you have entered.
Click
Cancel
to exit from this page without saving the changes.
