NV-600WI Managed Industrial Grade Wireless VDSL2 Router USER’S MANUAL Ver. A2
128
Fields in Static Routing:
Field
Description
Destination LAN IP
To enter the destination IP Address of routing entry. Enter the IP Address
0-0-0-0
of
routing entry.
Subnet Mask
To enter the Subnet Mask of routing entry. Enter the Subnet Mask
0-0-0-0
of routing
entry.
Gateway
To enter the Gateway address of routing entry. Enter the Gateway address of routing
entry.
Interface
To enter the outgoing interface name for this route. It can be selected from dropdown.
Click Add to create a new static route of specified destination IP, Netmask and Gateway values.
Click
Cancel
to exit from this page without saving the changes.
Notes:
1. Static Routing functionality is used to define the connected Gateway between the LAN and WAN.
For example, if we
want to activate the Network Time Protocol (NTP) service, we have to define the Gateway connected to NTP server in the
WAN.
2. The gateway of static routing is just used for switch (Bridged) mode.
3. The gateway IP domain should be the same LAN, e.g. if the LAN IP is 192.168.1.1, the gateway IP should be 192.168.1.X.
(where X represents a number, range is 2-255)
