manualshive.com logo in svg

Netopia R9100, User Reference Manual

The Netopia R9100 User Reference Manual is a comprehensive guide for mastering the features and functionalities of this cutting-edge product. Download this manual for free from our website and gain valuable insights, troubleshoot issues, and unlock the full potential of your Netopia R9100 experience.

Share
Download
background image

Monitoring Tools   12-7

Device Event History

The Device Event Histor y screen lists a total of 128 por t and system events, giving the time and date for each 
event, as well as a brief description. The most recent events appear at the top.

In the Statistics & Logs screen, select 

Device Event History

. The Device Event Histor y screen appears.

If the event histor y exceeds the size of the screen, you can scroll through it by using SCROLL UP and SCROLL 
DOWN.

To scroll up, select 

SCROLL UP

 at the top of the list and press Return. To scroll down, select 

SCROLL DOWN

 at 

the bottom of the list and press Return. 

To obtain more information about any event listed in the Device Event Histor y, select the event and then press 
Return. A dialog box containing more information about the selected event appears. Press Return or Escape to 
dismiss the dialog box.

To clear the Device Event Histor y, select 

Clear History

 and press Return.

Routing tables

You can view all of the IP, IPX, and AppleTalk routes in the Netopia R9100’s IP, IPX, and AppleTalk routing 
tables, respectively.

To go to a routing table screen, select the routing table you are interested in from the 

Statistics & Logs

 screen.

Each of the routing table screens represents a “snapshot” of the routing table information at the time the 
screen is first invoked. To take a new snapshot, select 

Update

 at the bottom of the screen and press Return.

                             Device Event History
                                         Current Date --  12/11/98 12:26:39 PM
 -Date-----Time-----Event------------------------------------------------------
 ----------------------------------SCROLL UP-----------------------------------
 08/11/98 12:25:28   Telnet connection up, address 163.176.8.134
 08/11/98 12:25:05 * IP address server configuration error; server disabled
 08/11/98 12:25:05 * IP: Route 0.0.0.0/0.0.0.0 not installed
 08/11/98 12:25:05 --BOOT: Warm start v4.3 ---------------------------------
 08/11/98 12:19:17 * IP address server configuration error; server disabled
 08/11/98 12:19:17 * IP: Route 0.0.0.0/0.0.0.0 not installed
 08/11/98 12:19:17 --BOOT: Warm start v4.3 ---------------------------------
 08/11/98 12:18:15 * IP address server configuration error; server disabled
 08/11/98 12:18:15 * IP: Route 0.0.0.0/0.0.0.0 not installed
 08/11/98 12:18:15 --BOOT: Warm start v4.3 ---------------------------------
 08/11/98 12:16:34   Telnet connection up, address 163.176.8.134
 08/11/98 12:15:54   IP address server initialization complete
 08/11/98 12:15:54 * IP: Route 0.0.0.0/0.0.0.0 not installed
 08/11/98 12:15:54 --BOOT: Warm start v4.3 ---------------------------------
 ---------------------------------SCROLL DOWN----------------------------------
 Clear History...

Return/Enter on event item for details or SCROLL [UP/DOWN] item for scrolling.

Summary of Contents for R9100





















































































































































































































































Reviews:

No comments

Related manuals for R9100

Ubiquiti M900 Quick Start Manual preview
M900
Brand: Ubiquiti Pages: 24
IBM TotalStorage SAN16M-R SAN Installation And Service Manual preview
TotalStorage SAN16M-R SAN
Brand: IBM Pages: 116
Lorex LNR100 SERIES Instruction Manual preview
LNR100 SERIES
Brand: Lorex Pages: 186
Black Box LT2060A Manual preview
LT2060A
Brand: Black Box Pages: 37
Riverbed SteelCentral NetExpress Installation Manual preview
SteelCentral NetExpress
Brand: Riverbed Pages: 38
Aruba IntroSpect Analyzer 2 Series Quick Start Manual preview
IntroSpect Analyzer 2 Series
Brand: Aruba Pages: 5
NETGEAR RP614 v2 Installation Manual preview
RP614 v2
Brand: NETGEAR Pages: 2
Enterasys Enterasys Matrix 2G4082-25 Hardware Installation Manual preview
Enterasys Matrix 2G4082-25
Brand: Enterasys Pages: 58
Galaxy Hunter Series Quick Start Manual preview
Hunter Series
Brand: Galaxy Pages: 30
ZyXEL Communications GS1100-10HP User Manual preview
GS1100-10HP
Brand: ZyXEL Communications Pages: 30
WTI NPS-16HD20-1 User Manual preview
NPS-16HD20-1
Brand: WTI Pages: 178
C&H Technologies EM405-8 User Manual preview
EM405-8
Brand: C&H Technologies Pages: 50
TRENDnet TDM-C400 User Manual preview
TDM-C400
Brand: TRENDnet Pages: 205
Stephen SON8010U User Manual preview
SON8010U
Brand: Stephen Pages: 8
Ubiquiti EdgePoint EP-R8 Quick Start Manual preview
EdgePoint EP-R8
Brand: Ubiquiti Pages: 22
Commax CVN-0430F User Manual preview
CVN-0430F
Brand: Commax Pages: 122
3Com X5 Quick Start preview
X5
Brand: 3Com Pages: 2
3Com 3CRWE825075A Quick Start Manual preview
3CRWE825075A
Brand: 3Com Pages: 8

Brands by name

Popular brands

Load more brands