manualshive.com logo in svg

Netopia R9100, User Reference Manual

The Netopia R9100 User Reference Manual is a comprehensive guide for mastering the features and functionalities of this cutting-edge product. Download this manual for free from our website and gain valuable insights, troubleshoot issues, and unlock the full potential of your Netopia R9100 experience.

Share
Download
background image

13-26  User’s Reference Guide

Adding a SAP filter

To add a new IPX SAP filter, select 

Add IPX SAP Filter

 in the IPX Filters and Filter Sets screen and press Return. 

The Add SAP Filter screen appears.

By default, the filter’s socket and type numbers and network and node addresses are null (all zeros). This sets 
the filter to match on any IPX SAP packet entr y. Configure the filter using criteria that meet your needs.

Follow these steps to configure the new SAP filter:

1.

Select 

Filter Name

 and enter a descriptive name for the filter.

2.

To specify a ser ver name for the filter to match on, select 

Server Name 

and enter the name of an IPX 

ser ver. You can use the wildcard characters * (asterisk) and ? (question mark). Use * to match any string, 
including a null string (no characters), and ? to match any single character in the ser ver’s name. For 
example, the filter could match on the ser ver name “NETOPIA” with “NETO*”, “NETO?IA”, and “NETOPIA*”.

3.

To specify a socket for the filter to match on, select 

Socket

 and enter an IPX socket number.

4.

To specify a type number for the filter to match on, select 

Type 

and enter an IPX type number.

5.

To specify an IPX network address for the filter to match on, select 

IPX Network

 and enter an IPX network 

address.

6.

To specify an IPX node address for the filter to match on, select 

IPX Node Address 

and enter an IPX node 

address.

7.

Select 

ADD FILTER NOW

 to save the current filter. Select 

CANCEL

 to exit the Add SAP Filter screen without 

saving the new filter.

Deleting a SAP filter

To delete a SAP filter, select 

Delete IPX SAP filter

 in the IPX Filters and Filter Sets screen to display a table of 

filters. Select a filter from the table and press Return to delete it. Press Escape to exit the table without deleting 
the filter.

                        Add Sap Filter

         Filter Name:

         Server Name:

         Socket:                            0000

         Type:                              0000

         IPX Network:                       00000000
         IPX Node Address:                  000000000000

         ADD FILTER NOW                     CANCEL

Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
Configure a new IPX SAP Filter. Finished?  ADD or CANCEL to exit.

Summary of Contents for R9100





















































































































































































































































Reviews:

No comments

Related manuals for R9100

Cambium Networks PTP 820 Series Manual preview
PTP 820 Series
Brand: Cambium Networks Pages: 29
Lantronix Device Server UDS 10 Hardware Manual preview
Device Server UDS 10
Brand: Lantronix Pages: 8
TC Electronic DB6 User Manual preview
DB6
Brand: TC Electronic Pages: 174
Google AC-1304 User Manual preview
AC-1304
Brand: Google Pages: 14
E-Tech Wireless Mini PCI Module User Manual preview
Wireless Mini PCI Module
Brand: E-Tech Pages: 42
WaiLan DeltaFire 500 User Manual preview
DeltaFire 500
Brand: WaiLan Pages: 27
NETGEAR DG834GT - 108 Mbps Super G Wireless ADSL Router Specifications preview
DG834GT - 108 Mbps Super G Wireless ADSL Router
Brand: NETGEAR Pages: 2
B&B Electronics Parallel & Serial Port Checker PPC User Manual preview
Parallel & Serial Port Checker PPC
Brand: B&B Electronics Pages: 4
Campbell NL115 User Manual preview
NL115
Brand: Campbell Pages: 38
CELOT CTR-180 User Manual preview
CTR-180
Brand: CELOT Pages: 34
Cisco MERAKI MX450 Installation Manual preview
MX450
Brand: Cisco MERAKI Pages: 4
YATO YT-82380 Original Instructions Manual preview
YT-82380
Brand: YATO Pages: 96
ActionTec GT704WR User Manual preview
GT704WR
Brand: ActionTec Pages: 115
Ozenda AR4505GW Instruction Manual preview
AR4505GW
Brand: Ozenda Pages: 116
G&D DVI-Vision-IP-Fiber Installation And Operation Manual preview
DVI-Vision-IP-Fiber
Brand: G&D Pages: 240
TRENDnet TDM-C400 User Manual preview
TDM-C400
Brand: TRENDnet Pages: 205
Patton electronics IpLink 2884 Quick Start Manual preview
IpLink 2884
Brand: Patton electronics Pages: 8
R3 Bridge E User Manual preview
Bridge E
Brand: R3 Pages: 48

Brands by name

Popular brands

Load more brands