manualshive.com logo in svg

Netopia R9100, User Reference Manual

The Netopia R9100 User Reference Manual is a comprehensive guide for mastering the features and functionalities of this cutting-edge product. Download this manual for free from our website and gain valuable insights, troubleshoot issues, and unlock the full potential of your Netopia R9100 experience.

Share
Download
background image

WAN and System Configuration   8-15

The following screen shows a sample syslog dump of WAN events:

Nov  5 10:14:06 tsnext.netopia.com   Link 1 down: PPP PAP failure
Nov  5 10:14:06 tsnext.netopia.com >>Issued Speech Setup Request from our DN: 5108645534
Nov  5 10:14:06 tsnext.netopia.com   Requested Disc. from DN: 917143652500
Nov  5 10:14:06 tsnext.netopia.com   Received Clear Confirm for our DN: 5108645534
Nov  5 10:14:06 tsnext.netopia.com   Link 1 down: Manual disconnect
Nov  5 10:14:06 tsnext.netopia.com >>Issued Speech Setup Request from our DN: 5108645534
Nov  5 10:14:06 tsnext.netopia.com   Requested Disc. from DN: 917143652500
Nov  5 10:14:06 tsnext.netopia.com   Received Clear Confirm for our DN: 5108645534
Nov  5 10:14:06 tsnext.netopia.com   Link 1 down: No answer
Nov  5 10:14:06 tsnext.netopia.com --Device restarted-----------------------------------------
Nov  5 10:14:06 tsnext.netopia.com >>Received Speech Setup Ind. from DN: (not supplied)
Nov  5 10:14:06 tsnext.netopia.com   Requested Connect to our DN: 5108645534
Nov  5 10:14:06 tsnext.netopia.com   ASYNC: Modem carrier detected (more) Modem reports: 26400
V34 
Nov  5 10:14:06 tsnext.netopia.com >>WAN: 56K Modem 1 activated at 115 Kbps
Nov  5 10:14:06 tsnext.netopia.com   Connect Confirmed to our DN: 5108645534
Nov  5 10:14:06 tsnext.netopia.com   PPP: Channel 1 up, Answer Profile name: Default Profile
Nov  5 10:14:06 tsnext.netopia.com   PPP: NCP up, session 1, Channel 1 Final (fallback)
negotiated auth: Local PAP , Remote NONE
Nov  5 10:14:06 tsnext.netopia.com   PPP: PAP  we accepted remote, Channel 1 Remote name: guest
Nov  5 10:14:06 tsnext.netopia.com   PPP: MP negotiated, session 1 Remote EDO: 06 03
0000C5700624 0
Nov  5 10:14:06 tsnext.netopia.com   PPP: CCP negotiated, session 1, type: Ascend LZS Local
mode: 1, Remote mode: 1
Nov  5 10:14:06 tsnext.netopia.com   PPP: BACP negotiated, session 1 Local MN: FFFFFFFF, Remote
MN: 00000001
Nov  5 10:14:06 tsnext.netopia.com   PPP: IPCP negotiated, session 1, rem: 192.168.10.100 local:
192.168.1.1
Nov  5 10:14:06 tsnext.netopia.com >>WAN: 56K Modem 1 deactivated
Nov  5 10:14:06 tsnext.netopia.com   Received Clear Ind. from DN: 5108645534, Cause: 0
Nov  5 10:14:06 tsnext.netopia.com   Issued Clear Response to DN: 5108645534
Nov  5 10:14:06 tsnext.netopia.com   Link 1 down: Remote clearing
Nov  5 10:14:06 tsnext.netopia.com   PPP: IPCP down, session 1
Nov  5 10:14:06 tsnext.netopia.com >>Received Speech Setup Ind. from DN: (not supplied)

Summary of Contents for R9100





















































































































































































































































Reviews:

No comments

Related manuals for R9100

Panasonic BL-C20 Troubleshooting Manual preview
BL-C20
Brand: Panasonic Pages: 18
N-Tron 702-W User Manual & Installation Manual preview
702-W
Brand: N-Tron Pages: 62
Quectel Wi-Fi-M.2 EVB User Manual preview
Wi-Fi-M.2 EVB
Brand: Quectel Pages: 23
Patton electronics 1000RC User Manual preview
1000RC
Brand: Patton electronics Pages: 9
Qlogic QLE7xxx Series Quick Start Manual preview
QLE7xxx Series
Brand: Qlogic Pages: 8
Gira 0535 00 Installation Instructions Manual preview
0535 00
Brand: Gira Pages: 6
Variscite VAR-EXT-CB105 Datasheet preview
VAR-EXT-CB105
Brand: Variscite Pages: 18
UfiSpace S9700-23D Hardware Installation Manual preview
S9700-23D
Brand: UfiSpace Pages: 32
SAB SABVISION NVR32 Quick Start Manual preview
SABVISION NVR32
Brand: SAB Pages: 29
B&B Electronics Elinx ESW200 Series Quick Start Manual preview
Elinx ESW200 Series
Brand: B&B Electronics Pages: 20
G&D DL-DVI-Vision-IP Series Installation And Operation Manual preview
DL-DVI-Vision-IP Series
Brand: G&D Pages: 228
Accton Technology MR3202A User Manual preview
MR3202A
Brand: Accton Technology Pages: 78
3Com 3C433279A Release Note preview
3C433279A
Brand: 3Com Pages: 12
MSNswitch UIS-322b Quick Installation Manual preview
UIS-322b
Brand: MSNswitch Pages: 2
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Brand: ivideon Pages: 11
JLCooper Electronics GangWay32 User Manual preview
GangWay32
Brand: JLCooper Electronics Pages: 12
Firetide HotPort 3103 User Manual preview
HotPort 3103
Brand: Firetide Pages: 32
Extreme Networks ACC-BKT-AX-BEAM Accessories Manual preview
ACC-BKT-AX-BEAM
Brand: Extreme Networks Pages: 35

Brands by name

Popular brands

Load more brands