Netopia R9100 User Reference Manual Download Page 98

Page: 98 / 244

9-22 User’s Reference Guide

■

From the

NetBios Type

pop-up menu, select the type of NetBIOS used on your network.

■

To ser ve DHCP clients with the NetBIOS scope, select

Serve NetBios Scope

and toggle it to

Yes

Select

NetBios Scope

and enter the scope.

■

To ser ve DHCP clients with the IP address of a NetBIOS name ser ver, select

Serve NetBIOS Name Server

and toggle it to

Yes

Select

NetBios Name Server IP Addr

and enter the IP address for the NetBIOS name ser ver.

You are now finished setting up DHCP NetBIOS Options. To return to the IP Address Ser ving screen press
Escape.

■

To enable BootP’s address ser ving capability, select

Serve BOOTP Clients

and toggle to

Yes

Note:

Addresses assigned through BootP are permanently allocated from the IP Address Ser ving pool until

you release them. To release these addresses, navigate back to the Main Menu, then Statistics & Logs,
Ser ved IP Addresses, and

Lease Management

DHCP NetBios Options

Main

Statistics

Ser ved IP

& Logs

Addresses

Lease Management

Summary of Contents for R9100





















































































































































































































































Search results

Summary of Contents for R9100

Reviews:

Related manuals for R9100

Brands by name

Popular brands

Netopia R9100, User Reference Manual

Search results

Summary of Contents for R9100

Reviews:

Related manuals for R9100

Brands by name

Popular brands