manualshive.com logo in svg

Netopia R9100, User Reference Manual

The Netopia R9100 User Reference Manual is a comprehensive guide for mastering the features and functionalities of this cutting-edge product. Download this manual for free from our website and gain valuable insights, troubleshoot issues, and unlock the full potential of your Netopia R9100 experience.

Share
Download
background image

5-2  User’s Reference Guide

Before running SmartStart

Be sure you have connected the cables and power source as described in Step 1 “Connect the Router” guide 
contained in your Netopia folio.

Before you launch the Smar tStar t application, make sure your computer meets the following requirements: 

PC

Macintosh

System 
software

Windows 95, 98, or NT operating system

MacOS 7.5 or later

Connectivity 
software

TCP/IP must be installed and properly 
configured. See 

“Configuring TCP/IP on 

Windows 95, 98, or NT computers” on 
page 5-6

MacTCP or Open Transpor t TCP/IP must be 
installed and properly configured. See 

“Configuring TCP/IP on Macintosh 
computers” on page 5-10

.

Connectivity 
hardware

Ethernet card (10Base-T)

Either a built-in or third-par ty Ethernet card 
(10Base-T)

Browser 
software

Netscape Communicator™ or Microsoft Internet Explorer, included on the Netopia CD. 
Required for web-based registration and web-based monitoring.

Notes: 
• 

The computer running Smar tStar t must be on the same Ethernet cable segment as the Netopia R9100. 

Repeaters, such as 10Base-T hubs between your computer and the Netopia R9100, are acceptable, but 
devices such as switches or other routers are not.
• Smar tStar t for the PC will set your TCP/IP control panel to “Obtain an IP address automatically” if it is 
not already set this way. This will cause your computer to reboot. If you have a specified IP address 
configured in the computer, you should make a note of it before running Smar tStar t, in case you do not 
want to use the dynamic addressing features built in to the Netopia Router and need to restore the fixed IP 
address.

Summary of Contents for R9100





















































































































































































































































Reviews:

No comments

Related manuals for R9100

Baracoda All in One Printer Communication Protocol Manual preview
All in One Printer
Brand: Baracoda Pages: 42
IBM 3708 Description preview
3708
Brand: IBM Pages: 342
Hama 53107 Operating Instruction preview
53107
Brand: Hama Pages: 10
Nayar Systems GSR Manual preview
GSR
Brand: Nayar Systems Pages: 37
Radwin Transportation FiberinMotion Deployment Manual preview
Transportation FiberinMotion
Brand: Radwin Pages: 122
Watchguard Firebox SOHO 6 Wireless Instructions Manual preview
Firebox SOHO 6 Wireless
Brand: Watchguard Pages: 8
Xenya XS26GS User Manual preview
XS26GS
Brand: Xenya Pages: 189
B+B SmartWorx spectre lte User Manual preview
spectre lte
Brand: B+B SmartWorx Pages: 52
TRENDnet TEG-S51SFP Quick Installation Manual preview
TEG-S51SFP
Brand: TRENDnet Pages: 10
ADC HiGain H2TU-R-402 List 7A Quick Installation preview
HiGain H2TU-R-402 List 7A
Brand: ADC Pages: 7
Renesas H8S/2633 User Manual preview
H8S/2633
Brand: Renesas Pages: 28
Rosco ND100 User Manual preview
ND100
Brand: Rosco Pages: 20
3Com Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface... Quick Manual preview
Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface...
Brand: 3Com Pages: 12
HMS Anybus AWB3000 Startup Manual preview
Anybus AWB3000
Brand: HMS Pages: 18
Paradyne 8310 MVLt User Manual preview
8310 MVLt
Brand: Paradyne Pages: 108
MTL 9468-ET Instruction Manual preview
9468-ET
Brand: MTL Pages: 12
Vivotek PZ7111 Quick Installation Manual preview
PZ7111
Brand: Vivotek Pages: 12
Digi TransPort WR44 v2 Testing Manual preview
TransPort WR44 v2
Brand: Digi Pages: 32

Brands by name

Popular brands

Load more brands