Netopia R9100 User Reference Manual Download Page 133

Page: 133 / 244

Monitoring Tools 12-15

Setting the IP trap receivers

Select

Add IP Trap Receiver

Select

Receiver IP Address or Domain Name

. Enter the IP address or domain name of the SNMP manager

you want to receive the trap.

Select

Community String

. Enter whatever community string is appropriate for the traps to be sent to the

management station whose IP address or domain name you entered on the previous line.

Select

Add Trap Receiver Now

and press Return. You can add up to seven more receivers.

Viewing IP trap receivers

To display a view-only table of IP trap receivers, select

Display/Change IP Trap Receiver

in the IP Trap

Receivers screen.

Modifying IP trap receivers

To edit an IP trap receiver, select

Display/Change IP Trap Receiver

in the IP Trap Receivers screen.

Select an IP trap receiver from the table and press Return.

In the

Change IP Trap Receiver

screen, edit the information as needed and press Return.

Deleting IP trap receivers

To delete an IP trap receiver, select

Delete IP Trap Receiver

in the IP Trap Receivers screen.

Select an IP trap receiver from the table and press Return.

In the dialog box, select

Continue

and press Return.

IP Trap Receivers

Display/Change IP Trap Receiver...

Add IP Trap Receiver...

Delete IP Trap Receiver...

Return/Enter to modify an existing Trap Receiver.
Navigate from here to view, add, modify and delete IP Trap Receivers.

Summary of Contents for R9100





















































































































































































































































Search results

Summary of Contents for R9100

Reviews:

Related manuals for R9100

Brands by name

Popular brands

Netopia R9100, User Reference Manual

Search results

Summary of Contents for R9100

Reviews:

Related manuals for R9100

Brands by name

Popular brands