NB3000-Line-Hd User Manual 4.2
5.6.5. Dial-In
On this page you can configure the Dial-In server in order to establish a data connection
over GSM calls. Thus, one would generally apply a required service type of 2G-only, so that
the modem registers to GSM only. Naturally, a concurrent use of outgoing WWAN interfaces
and Dial-In connection is not possible.
Figure 5.36.: Dial-in Server Settings
The following settings can be set:
Parameter
Dial-in Server Configuration
Administrative status
Specifies whether incoming calls shall be answered or not
Modem
Specifies the modem on which calls can come in
User
Specifies the username for the incoming PPP connection
Password
Specifies the password for the incoming PPP connection
Address range start
Start of the IP address range assigned to incoming clients
Address range size
Number of addresses for client IP address range
113
