NB3000-Line-Hd User Manual 4.2
Prior to setting up an access point, it is always a good idea to run a network scan for getting
a list of neighboring WLAN networks and then choose the less interfering channel. Please
note that two adequate channels are required for getting good throughputs with 802.11n
and a bandwidth of 40 MHz.
WLAN Configuration
Running in
client
mode, it is possible to connect to one ore more remote access-points.
The system will switch to the next network in the list in case one goes down and return to
the highest-prioritized network as soon as it comes back. You can perform a WLAN network
scan and pick the settings from the discovered information directly. The authentication
credentials have to be obtained by the operator of the remote access point.
Parameter
WLAN Client Configuration
SSID
The network name (called SSID)
Security mode
The desired security mode
WPA/WPA2 mixed mode
WPA2 should be preferred over WPA1, running WPA/WPA2
mixed-mode offers both.
WPA cipher
The WPA cipher to be used, the default is to run both (TKIP and
CCMP)
Identity
The identity used for WPA-RADIUS and WPA-EAP-TLS
Passphrase
The passphrase used for authentication with WPA-PSK, other-
wise the key passphrase for WPA-EAP-TLS
Force PMF
Enables Protected Management Frames
Required signal strength
Required signal strength to esablish the connection
60
