NetModule NB3000-Line-Hd User Manual Download Page 45

Page: 45 / 225

NB3000-Line-Hd User Manual 4.2

connection (115200 8N1) attached to the serial port of your local computer. You will

also see the kernel messages at bootup there.

3. Recovery Image: In severe cases we can provide a recovery image on demand which

can be loaded into RAM via TFTP and executed. It offers a minimal system image for

running a software update or doing other modiﬁcations. You will be provided with two

ﬁles, recovery-image and recovery-dtb, which must be placed in the root directory of a

TFTP server (connected via LAN1 and address 192.168.1.254). The recovery image can

be launched from the boot-loader using a serial connection. You will have to stop the

boot process by pressing

and enter the bootloader. You can then issue

run recovery

to load the image and start the system which can be accessed via HTTP/SSH/Telnet and

its IP address

192.168.1.1

afterwards. This procedure can be also initiated by holding

the factory reset button longer than 15 seconds.

Summary of Contents for NB3000-Line-Hd


































































































































































































































Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands

NetModule NB3000-Line-Hd, User Manual

Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands