NetModule NB3000-Line-Hd User Manual Download Page 166

Page: 166 / 225

NB3000-Line-Hd User Manual 4.2

Parameter

Guest Networking

Bridge interface

The interface to which the guest interace shall be bridged

The guest devices parameter shows a list of devices (e.g bluetooth, CAN) which can be pro-

vided to the guest system.

Parameter

Guest Devices

Enable devices

Enable or disable device for the guest

In order to limit the ressources for a guest, the following settings can be applied:

Parameter

Guest Limits

CPU

The number of CPUs used for the guest

Memory

The amount of memory available for the guest

Reboot

This page can be used to set up a periodic automatic reboot but also to trigger a manual

reboot which will be issued immediately.

157

Summary of Contents for NB3000-Line-Hd


































































































































































































































Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands

NetModule NB3000-Line-Hd, User Manual

Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands