NetModule NB3000-Line-Hd User Manual Download Page 224

Page: 224 / 225

NB3000-Line-Hd User Manual 4.2

Event

Description

opcua-write.are

This script will write a new value to a node at a OPC-UA server.

ping-supervision.are

This script will supervise a speciﬁed host.

read-conﬁg.are

This script can be used to read a conﬁguration parameter.

remote-mail.are

This

script

reads

and

sends

mails

from

remote

IMAP/POP3/SMTP server

scan-mobile.are

This script can be used to switch the Mobile LAI according to

available networks

scan-wlan.are

This script can be used to switch the WLAN client network ac-

cording to availability

send-mail.are

This script will send an E-Mail to the speciﬁed address.

send-sms.are

This script will send an SMS to the speciﬁed phone number.

send-techsupport.are

This script will generate a techsupport and send it to the spec-

iﬁed E-Mail address.

serial-read.are

This script can be used to read messages from the serial port.

serial-readwrite.are

This script will write to and read from the serial port.

serial-tcp-broadcast.are

This script reads messages coming from the serial port and

forwards them via TCP to remote hosts (and vice versa).

serial-tcsetattr.are

This script can be used to set/get the attributes of the serial

port.

serial-udp-server.are

This script reads messages coming from the serial port and

forwards them via UDP to a remote host (and vice versa).

serial-write.are

This script can be used to write a message to the serial port.

set-ipsec-route.are

set route to IPSEC server depending on active WWAN / WLAN

network

sms-conﬁrm.are

This script will send out a message and conﬁrm its delivery.

sms-control.are

This script will execute commands received by SMS.

sms-delete-inbox.are

This script can be used to ﬂush the SMS inbox.

sms-read-inbox.are

This script can be used to read the SMS inbox.

sms-to-email.are

This script will forward incoming SMS messages to a given E-

mail address.

sms-to-serial.are

This script can be used to write a received SMS to the serial

port.

snmp-agent.are

This script extends MIB entries of the SNMP agent

snmp-cmd.are

This script issues SNMP set/get commands

215

Summary of Contents for NB3000-Line-Hd


































































































































































































































Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands

NetModule NB3000-Line-Hd, User Manual

Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands