NetModule NB3000-Line-Hd User Manual Download Page 172

Page: 172 / 225

NB3000-Line-Hd User Manual 4.2

Parameter

Module Firmware Update

Storage

The temporary storage which shall be used for the update pro-

cedure. For boxes with limited amount of ﬂash it is possible to

use an USB stick which must be properly set up in the USB

section and hold a proper ﬁlesystem such as ext4.

URL

The server URL where the ﬁrmware package should be down-

loaded from (e.g.

protocol://server/path/file

). Supported

protocols are TFTP, HTTP, HTTPS, and FTP. For boxes with lim-

ited amount of ﬂash you may also use

usb0://<path-to-

firmware-package>

A ﬁrmware package (ZIP) usually consists of a ﬂash utility, an info ﬁle and the correspond-

ing ﬁrmware ﬁles. Please follow http://www.netmodule.com/support/supportform.aspx in

order to get the latest version.

5.8.5. Software Proﬁles

The system consists of two root partitions which can hold different software versions and

this menu can be used to switch between them. By doing so, you can test a newer software

version and simply switch-back if things go wrong.

163

Summary of Contents for NB3000-Line-Hd


































































































































































































































Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands

NetModule NB3000-Line-Hd, User Manual

Search results

Summary of Contents for NB3000-Line-Hd

Reviews:

Related manuals for NB3000-Line-Hd

Brands by name

Popular brands