Managed Switch CLI Manual, Release 8.0.3
Routing Commands
4-33
v1.0, July 2010
show ip vrrp interface
This command displays all configuration information and VRRP router statistics of a virtual router
configured on a specific interface. Use the output of the command to verify the track interface and
track IP route configurations.
The following shows example CLI display output for the command.
show ip vrrp interface <u/s/p> <vrid>
Primary IP Address............................. 1.1.1.5
VMAC Address................................... 00:00:5e:00:01:01
Authentication Type............................ None
Priority....................................... 80
Configured priority.......................... 100
Advertisement Interval (secs).................. 1
Pre-empt Mode.................................. Enable
Administrative Mode............................ Enable
State.......................................... Initialized
Track Interface State DecrementPriority
--------------- ------ ------------------
Format
show ip vrrp interface {<unit/slot/port> <vrid> | vlan <1-4093>}
Modes
• Privileged EXEC
• User EXEC
Term
Definition
Primary IP
Address
The configured IP address for the Virtual router.
VMAC address
The VMAC address of the specified router.
Authentication
type
The authentication type for the specific virtual router.
Priority
The priority value for the specific virtual router, taking into account any priority decrements
for tracked interfaces or routes.
Configured
Priority
The priority configured through the
ip vrrp <vrid> priority <1-254>
command.
Advertisement
interval
The advertisement interval in seconds for the specific virtual router.
Pre-Empt Mode
The preemption mode configured on the specified virtual router.
Administrative
Mode
The status (Enable or Disable) of the specific router.
State
The state (Master/backup) of the virtual router.
