![NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual Download Page 194](http://html1.mh-extra.com/html/netgear/gsm7328sv2-prosafe-24-4-gigabit-ethernet-l3-managed-stackable-switch/gsm7328sv2-prosafe-24-4-gigabit-ethernet-l3-managed-stackable-switch_cli-manual_1672540194.webp)
Managed Switch CLI Manual, Release 8.0.3
Switching Commands
3-158
v1.0, July 2010
set mld mcrtexpiretime
Use this command to set the Multicast Router Present Expiration time. The time is set for the
system, on a particular interface or VLAN. This is the amount of time in seconds that a switch
waits for a query to be received on an interface before the interface is removed from the list of
interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0 indicates
an infinite timeout, i.e. no expiration.
no set mld mcrtexpiretime
Use this command to set the Multicast Router Present Expiration time to 0. The time is set for the
system, on a particular interface or a VLAN.
set mld mrouter
Use this command to configure the VLAN ID for the VLAN that has the multicast router attached
mode enabled.
Default
0
Format
set mld mcrtexpiretime
<0-3600>
Mode
• Global Config
• Interface Config
Default
0
Format
set mld mcrtexpiretime
<vlanid> <0-3600>
Mode
• VLAN Config
Format
no set mld mcrtexpiretime
Mode
• Global Config
• Interface Config
Format
no set mld mcrtexpiretime
<vlanid>
Mode
• VLAN Mode
Format
set mld mrouter
<vlanid>
Mode
Interface Config