Managed Switch CLI Manual, Release 8.0.3
IP Multicast Commands
5-6
v1.0, July 2010
show ip mcast mroute source
This command displays the multicast configuration settings such as flags, timer settings, incoming
and outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the
multicast mroute table containing the given source IP address or source IP address and group IP
address pair.
If you use the
detail
parameter, the command displays the following column headings in the
output table:
If you use the
summary
parameter, the command displays the following column headings in the
output table:
Term
Definition
Source IP
The IP address of the multicast data source.
Group IP
The IP address of the destination of the multicast packet.
Protocol
The multicast routing protocol by which this entry was created.
Incoming
Interface
The interface on which the packet for this group arrives.
Outgoing
Interface List
The list of outgoing interfaces on which this packet is forwarded.
Format
show ip mcast mroute source <sourceipaddr> {summary | detail}
Modes
• Privileged EXEC
• User EXEC
Term
Definition
Source IP
The IP address of the multicast data source.
Group IP
The IP address of the destination of the multicast packet.
Expiry Time
The time of expiry of this entry in seconds.
Up Time
The time elapsed since the entry was created in seconds.
RPF Neighbor
The IP address of the RPF neighbor.
Flags
The flags associated with this entry.
Term
Definition
Source IP
The IP address of the multicast data source.
Group IP
The IP address of the destination of the multicast packet.
