manualshive.com logo in svg

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch, Cli Manual

Share
Download
NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual Download Page 336

Managed Switch CLI Manual, Release 8.0.3

Routing Commands

4-88

v1.0, July 2010

no split-horizon

This command sets the default RIP split horizon mode.

redistribute (RIP)

This command configures RIP protocol to redistribute routes from the specified source protocol/
routers. There are five possible match options. When you submit the command redistribute ospf 
match 

<

match-type

>

 the match-type or types specified are added to any match types presently 

being redistributed. Internal routes are redistributed by default.

no redistribute 

This command de-configures RIP protocol to redistribute routes from the specified source 
protocol/routers. 

Format

split-horizon {none | simple | poison}

Mode

Router RIP Config

Format

no split-horizon

Mode

Router RIP Config

Default

• metric—not-configured
• match—internal

Format for 
OSPF as 
source 
protocol

redistribute ospf [metric <0-15>] [match [internal] [external 1] 

[external 2] [nssa-external 1] [nssa-external-2]]

Format for 
other source 
protocol

redistribute {static | connected} [metric <0-15>]

Mode

Router RIP Config

Format 

no redistribute {ospf | static | connected} [metric] [match [internal] 

[external 1] [external 2] [nssa-external 1] [nssa-external-2]]

Mode

Router RIP Config

Summary of Contents for GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch





















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands