manualshive.com logo in svg

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch, Cli Manual

Share
Download
NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual Download Page 291

Managed Switch CLI Manual, Release 8.0.3

Routing Commands

4-43

v1.0, July 2010

no area nssa default-info-originate (OSPF)

This command disables the default route advertised into the NSSA. 

area nssa no-redistribute (OSPF)

This command configures the NSSA Area Border router (ABR) so that learned external routes will 
not be redistributed to the NSSA.

no area nssa no-redistribute (OSPF)

This command disables the NSSA ABR so that learned external routes are redistributed to the 
NSSA.

area nssa no-summary (OSPF)

This command configures the NSSA so that summary LSAs are not advertised into the NSSA.

no area nssa no-summary (OSPF)

This command disables nssa from the summary LSAs.

Format

no area <areaid> nssa default-info-originate [<metric>] [{comparable 

| non-comparable}]

Mode

Router OSPF Config

Format

area <areaid> nssa no-redistribute

Mode

Router OSPF Config

Format

no area <areaid> nssa no-redistribute

Mode

Router OSPF Config

Format

area <areaid> nssa no-summary

Mode

Router OSPF Config

Format

no area <areaid> nssa no-summary

Mode

Router OSPF Config

Summary of Contents for GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch





















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands