Managed Switch CLI Manual, Release 8.0.3
Using the Command-Line Interface
1-7
v1.0, July 2010
Table 6
explains how to enter or exit each mode.
Router OSPFv3
Config
Switch (Config rtr)#
Contains the OSPFv3 configuration commands.
Router RIP Config
Switch (Config-router)#
Contains the RIP configuration commands.
Router BGP
Config
Switch (Config-router)#
Contains the BGP4 configuration commands.
MAC Access-list
Config
Switch (Config-mac-access-list)#
Allows you to create a MAC Access-List and to
enter the mode containing MAC Access-List
configuration commands.
TACACS Config
Switch (Tacacs)#
Contains commands to configure properties for
the TACACS servers.
DHCP Pool
Config
Switch (Config dhcp-pool)#
Contains the DHCP server IP address pool
configuration commands.
DHCPv6 Pool
Config
Switch (Config dhcp6-pool)#
Contains the DHCPv6 server IPv6 address pool
configuration commands.
Stack Global
Config Mode
Switch (Config stack)#
Allows you to access the Stack Global Config
Mode.
ARP Access-List
Config Mode
Switch (Config-arp-access-list)#
Contains commands to add ARP ACL rules in
an ARP Access List.
Table 6. CLI Mode Access and Exit
Command Mode
Access Method
Exit or Access Previous Mode
User EXEC
This is the first level of access.
To exit, enter
logout
.
Privileged EXEC
From the User EXEC mode, enter
enable
.
To exit to the User EXEC mode, enter
exit
or
press
Ctrl-Z.
Global Config
From the Privileged EXEC mode,
enter
configure.
To exit to the Privileged EXEC mode, enter
exit
,
or press
Ctrl-Z
.
VLAN Config
From the Privileged EXEC mode,
enter
vlan database.
To exit to the Privileged EXEC mode, enter
exit
,
or press
Ctrl-Z
.
Interface Config
From the Global Config mode,
enter
interface <unit/slot/port>
or
interface loopback <id>
or
interface tunnel <id>
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
Table 5. CLI Command Modes (continued)
Command Mode
Prompt
Mode Description
