Managed Switch CLI Manual, Release 8.0.3
Switching Commands
3-177
v1.0, July 2010
show lldp remote-device
Use this command to display summary information about remote devices that transmit current
LLDP data to the system. You can show information about LLDP remote data received on all ports
or on a specific port.
Example: The following shows example CLI display output for the command.
Errors
The number of invalid LLDP frames received on the port.
Ageouts
Total number of times a complete remote data entry was deleted for the port because the
Time to Live interval expired.
TLV Discards
The number of TLVs discarded.
TLV Unknowns
Total number of LLDP TLVs received on the port where the type value is in the reserved
range, and not recognized.
TLV MED
Total number of LLDP MED TLVs received on the local ports.
TVL802.1
Total number of 802.1 LLDP TLVs received on the local ports.
TVL802.3
Total number of 802.3 LLDP TLVs received on the local ports.
Format
show lldp remote-device
{<unit/slot/port> | all}
Mode
Privileged EXEC
Term
Definition
Local Interface
The interface that received the LLDPDU from the remote device.
RemID
An internal identifier to the switch to mark each remote device to the system.
Chassis ID
The ID that is sent by a remote device as part of the LLDP message, it is usually a MAC
address of the device.
Port ID
The port number that transmitted the LLDPDU.
System Name
The system name of the remote device.
Term
Definition
