manualshive.com logo in svg

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch, Cli Manual

Share
Download
NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual Download Page 150

Managed Switch CLI Manual, Release 8.0.3

Switching Commands

3-114

v1.0, July 2010

no monitor 

This command removes all the source ports and a destination port for the and restores the default 
value for mirroring session mode for all the configured sessions.

show monitor session 

This command displays the Port monitoring information for a particular mirroring session.

Format

no monitor session 

<session-id> [{source interface <unit/slot/port> 

| destination interface <unit/slot/port> | mode}]

Mode

Global Config

Note: 

This is a stand-alone “no” command. This command does not have a “normal” 

form.

Default

enabled

Format

no monitor

Mode

Global Config

Note: 

The

 <session-id>

 parameter is an integer value used to identify the session. 

In the current version of the software, the 

<session-id>

 parameter is always 

one (1)

Format

show monitor session

 

<session-id>

Mode

Privileged EXEC

Term

Definition

Session ID

An integer value used to identify the session. Its value can be anything between 1 and 
the maximum number of mirroring sessions allowed on the platform.

Summary of Contents for GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch





















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands