manualshive.com logo in svg

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch, Cli Manual

Share
Download
NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual Download Page 69

Managed Switch CLI Manual, Release 8.0.3

Switching Commands

3-33

v1.0, July 2010

no vlan acceptframe

This command resets the frame acceptance mode for the interface to the default value.

vlan ingressfilter

This command enables ingress filtering. If ingress filtering is disabled, frames received with 
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and 
forwarded to ports that are members of that VLAN.

no vlan ingressfilter

This command disables ingress filtering. If ingress filtering is disabled, frames received with 
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and 
forwarded to ports that are members of that VLAN.

vlan makestatic

This command changes a dynamically created VLAN (one that is created by GVRP registration) to 
a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN 
identification number. VLAN range is 2-4093.

Format

no vlan acceptframe

Mode

Interface Config

Default

disabled

Format

vlan ingressfilter

Mode

Interface Config

Format

no vlan ingressfilter

Mode

Interface Config

Format

vlan makestatic 

<2-4093>

Mode

VLAN Config

Summary of Contents for GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch





















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands