manualshive.com logo in svg

NESS ID TECK Finger007, User Manual

Share
Download
NESS ID TECK Finger007 User Manual Download Page 8

 

 

101-092                                                                                          8         

                                   

FINGER007 

–

 Version 4.0 

IDTeck – FINGER007 FINGERPRINT & PROXIMITY READER

Time Schedule Set-up 

You can program 10 time schedules and apply one time schedule to each user. Each time schedule has 
8 different time zones from Monday to Sunday (7 time zones) and one holiday. Each time code has 5 
different time intervals so you can program 5 different time intervals to each day. Also you can 
program time schedule for individual inputs and outputs.   
Note each input (or output) can have a time schedule assigned to it. In this case the input will only be 
active during this time schedule and the output can also active automatically during a time schedule. 
Each time schedule is also linked to one of the holiday schedules.   

 

Holiday Schedule Set-up 

Excepting Sunday, you can program 32 holidays to one holiday schedule. Each holiday schedule is 
linked to one time schedule, which has assigned time codes for holidays. So you can program all 
holidays to holiday schedule and the time code for holidays is programmed to holiday time zone of 
time schedule. 
 

Example :    A : Holiday schedule 01 linked to time schedule 01, 

                          Holiday schedule 02 linked to time schedule 02. 

 

 

      B : Holiday schedule 02 linked to time schedule 01, 

                Holiday schedule 01 linked to time schedule 02.  

 

Forced Door Open and Door Open Too Long Alarm 

When a door is opened by force, the Door Contact Output is generated. And, when the door is opened 
by normal operation and not closed after 20 sec. A door-open alarm (blink buzzer) will be generated 
until the door is closed. 
       

Duress Alarm / Alarm Arm – Disarm Code 

You can select 

Duress Mode / External Alarm Arm - Disarm

 feature to be enabled or disable. If you 

select Duress Mode enable, in case of Duress, enter the 2 digit Duress Password (code) and press 
<

ENT

> and open the door as normal. Both the door contact and alarm outputs will activate and the 

Duress alarm event will be sent to the host PC. 
If you wish to use this feature to Arm / Disarm an alarm system (eg Ness D8/16 or D24 Alarm system), 
enter the 2 digit Arm / Disarm Password (code) and press <

ENT

>. In this case the door will unlock as 

normal via the door contact and the “Aux” output can be used to pulse the Keyswitch / Arm-Disarm 
input of the alarm panel. (The Arming / Disarming event can also be sent to the host PC. 
 

Summary of Contents for Finger007






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands