manualshive.com logo in svg

NESS ID TECK Finger007, User Manual

Share
Download
NESS ID TECK Finger007 User Manual Download Page 22

 

 

101-092                                                                                          22         

                                   

FINGER007 

–

 Version 4.0 

IDTeck – FINGER007 FINGERPRINT & PROXIMITY READER

7.1 INITIALIZATION OF FINGER007 

 

Before system installation and when you can’t enter set-up menu(system error or something wrong) then 
you have to H/W initialise. You can H/W initialise using extra reader port. Turn off the system power and 
connect 3 wires (pink, cyan and black(GND)), and turn on the system power. (

Ref. 5.3 FINGER007 

INITIALIZATION

). Initialising will erase all stored data incl. registered IDs event data. Then you have 

to setting system parameter. 
Before first installation, you must H/W initialise.   

In case of over V4.70, you must connect battery backup S/W in reverse side before H/W initialisation.

 

 

System is Clear 

Master Password 

System Initialize 

 
 
 

 

 
7.2 HOW TO ENTER THE SETUP MENU 

 
To set-up or to change the 

FINGER007

 settings, you have to enter the 

SETUP MENU

 first. To do so, 

press the 8 times <0> key for 

Master ID(

Default setting “00000000”) and <

ENT

> key and press 

Master 

P/W

 (Default setting “3141”) then you can get into SETUP MENU. There are 4 main SETUP MENU and 

you first get into [SETUP MENU F1]. You can move to other SETUP MENU by pressing <F1> key for 
[SETUP MENU F1], <F2> key for [SETUP MENU F2], <F3> key for [SETUP MENU F3] and <F4> key 
for [SETUP MENU F4]. There are several 

SUB MENU

 in the main SETUP MENU and you can scroll up 

and down the SUB MENU by pressing <4> and <6> key in the main SETUP MENU. If you press <ESC> 
key then FINGER007 will exit the SETUP MENU then return to normal operation. You can also change 
the Master ID in the [SETUP MENU F1]. 
The Master ID for 

FINGER007SR

 is 10 times <0> key (Default setting “0000000000” ), and default 

Master P/W is <3141>. 

 

7.3 DATE AND TIME SETTING 

 
Select [TIME SETTING] in the [SETUP MENU F1] and enter the Year / Month / Date / Hour / Minute / 
Second / Day(Total 15 digits) as shown below. LCD will display the new Date and Time after the time 
setting completed but year and day will not be displayed. 

FINGER007

 has 24 hours system and day codes 

are 1 for Sunday, 2 for Monday, 3 for Tuesday, 4 for Wednesday, 5 for Thursday, 6 for Friday and 7 for 
Saturday. The Master ID for 

FINGER007SR

 is 10 digits number (Default setting “0000000000”). 

Summary of Contents for Finger007






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands