101-092 39
FINGER007
–
Version 4.0
IDTeck – FINGER007 FINGERPRINT & PROXIMITY READER
9.2.3 DEFINING OUTPUTS IN COMPLIANCE WITH INPUTS
IN/OUT DEFINE
DISPLAY CURRENT SET
'ENT'
SELECT INDEX
(USE "4","6"KEY)
ENTER NEW TIM E OR T/S INDEX
(10 DIGIT OR EVEN DIGIT + "ENT")
'ENT'
COM PLETION?
YES
'ESC'
NO
☞
. Select input sources by changing index No. with the keys
<4>
or
<6>
,
and press
<ENT>
key, and you’ll see a cursor blinking at the first digit,
from the left, of the five couples of digit, which corresponds to relay1,
relay2, TTL1, TTL2 and buzzer, respectively. Then enter the delay
times(refer to the table below) one by one. Now, an inputs/outputs
definition has completed. For further definition, repeat the process. To end
defining inputs/outputs, press
<ESC>
key, and you will see the first figure
of the menu.
NOTE
: The five couples of digit of [15] Output T/S and [16] Input/Output
T/S are time sched le inde es
☞
. You can program or deactivate each output to be generated and choose
how long (in seconds) they will last. There are default values as seen in
the table 2 below
IN/OUT DEFINE
1. Exit Button
9.2.4 HOLIDAY INDEX SETTING
☞
. Holiday Index is to link the Holiday Schedule (H/S) to Time Schedule.
You can set-up one of holiday index (01~10) to one of T/S index (01~10)
so that the Holiday Time Code in the T/S can be applied for the Holidays in
the T/S. Default H/D Index is ‘00’ which means no holidays are applied to
T/S. Select HOLIDAY INDEX menu and press
<ENT>
then select desired
T/S INDEX (01~10) by pressing
<4>
or
<6>
key then press
<ENT>
key to
input 2 digit H/D Index.
HOLIDAY INDEX
T/S Index : 01
