manualshive.com logo in svg

NESS ID TECK Finger007, User Manual

Share
Download
NESS ID TECK Finger007 User Manual Download Page 5

 

 

101-092                                                                                          5         

                                   

FINGER007 

–

 Version 4.0 

IDTeck – FINGER007 FINGERPRINT & PROXIMITY READER

 

2.  INTRODUCTION 

 

 

2.1 IDENTIFYING SUPPLIED PARTS 
 

Please unpack and check the contents of the box. (Optional accessories, if purchased, may be included in 
the package) 

 

 

 
 

2.2 ABOUT NESS - IDTECK FINGER007 
 

The 

NESS - IDTECK FINGER007

 is a highly advanced, intelligent single door controller (network 

able) with a powerful 32bit and dual 8bit microprocessor to meet the market requirement for a robust 

integrated solution for access control and time & attendance. The unit is designed to be flexible and 

reliable as well as provide the ultimate in biometric high security at a reasonable cost. This user-friendly 

device allows you to register up to 720 fingerprint IDs (optional 2,000/4,500); add / delete user IDs 

conveniently; store up to 26,000 transactions in its event buffer; easily report and archive information to 

Excel or Access databases; and ultimately successfully manage all access control and time & attendance 

issues. With a built-in 4" RF reader, keypad for Personal Identification Numbers (PIN), and a 

sophisticated biometric fingerprint analyser, the 

FINGER007

 offers up to three levels of ID verification. 

Any combination of proximity (RFID), PIN, and biometric may be used and different verification levels 

can be custom programmed for each user or user group. Four independent inputs can be utilized for a 

wide variety of controls including exit buttons, door contacts, PIR sensors and fire detection equipment. 

Actions to be taken and time settings can be programmed with the front keypad or via the intuitive 

Windows based software program. The 

FINGER007

 can be used both as a stand-alone system and also 

be networked. All control setting values such as ID numbers, inputs/outputs, real-time clock, time 

schedules, and event transaction reports can be uploaded and/or downloaded to and from the host 

computer. The compact and contemporary unit is easily installed and programming requires no significant 

knowledge of access control or time & attendance. The Three-LED indicator lights inform you of the 

systems operating status at real time and the digital display acts as a programming aid as well as a 

regulation time clock. By bundling the ultimate in high security access control and comprehensive 

employee management tools into a compact user friendly unit, the field proven 

NESS - IDTECK 

FINGER007

 has made real what until recently was thought only to be possible in science fiction. 

Summary of Contents for Finger007






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands