101-092 48
FINGER007
–
Version 4.0
IDTeck – FINGER007 FINGERPRINT & PROXIMITY READER
9.4.4 LCD TEST
9.4.5 KEYPAD TEST
9.4.6 READER TEST
Last Update
LCD TEST
☞
. To test the performance of LCD, press
<ENT>
key.
As the test proceeds several characters will move quickly from right to left.
KEYPAD TEST
☞
. Press
<ENT>
key to start the keypad test.
When operating normally, pressing the keys on the keypad will
display the corresponding letter on the LCD.
Note
: The letters on the LCD, A, B, C, D, E and F are referred to
<F1>
,
<F2>
,
<F3>
,
<F4>
,
<ESC>
and
<ENT>
key, respectively.
READER TEST
Scanning …
Reader 1
Card No.
Reader No.
☞
. To test the performance of the reader, press
<ENT>
key.
NOTE
: In case
FINGER007P
, this option is not applicable.
The reader is waiting for an RF card to read. Present an RF card to the
reader. The test has completed successfully if the LCD displays the ID card
number(example shown to left)
OUTPUT 5
OUTPUT TEST
☞
. To test the output performances, press
<ENT>
key. If the output
performance has no problems, the test will proceeds as follows :
First
, the green LED blinks twice as the relay is being shorted and opened
twice. The relay ticktack as it works, you can hear the sound.
Second
, the yellow LED blinks twice as the relay is being shorted and
opened twice. The relay ticktack as it works, you can hear the sound.
Third
, the LCD changes its figure,
<ON, OFF, ON, OFF>
. There’s no other
presentation you can see.
Fourth
, the buzzer beeps twice.
