68
Chapter X System Parameter Settings
In [Editing Mode], open [System Composition] in [System Configuration] in the menu bar, as shown
in the following figure:
Front rail/rear rail: setting the zero position of the front and rear rails respectively.
Left offset: setting the position of the lower left corner when creating a new program.
Right offset: setting the position of the lower right corner when creating a new program.
Park position: the position of the machine to be inspected.
Rail/convey:setting the plate feeding direction of the rail.
Right board entry: right board entry and left board exit.
Left board entry: left board entry and right board exit.
Automatic rail width adjustment: the monorail and the lower cover can be automatically adjusted
according to the track width saved by the program.
In and out insi: matching with the previous board entry direction to achieve in and out in the same
direction.