27
Then click [Operation]-[Set the upper right corner]. A dialog box will prompt: {Please
extract the image of the whole PCB!
｝
, click [Confirm]. Note: the above process of determining
the lower right corner and upper left corner of PCB is only applicable to the left board placement
direction. If the board is placed on the right side and the track direction is from right to left, it is
to determine the lower right corner and upper left corner of PCB.
Before setting the upper right corner, if special PCB needs image pre-processing, it can be
adjusted in the lower right corner of the interface, as shown in the following figure:
Note: If there are special PCB, the brightness and contrast can be adjusted based on each board,
and the brightness of a certain channel can be increased as needed until the image is clear.
Next, click [Operation]-[PCB Scan], and a dialog box will prompt for setting the model
name and file name of the program. Enter the model name and file name in the lower left box
and click [OK].