60
Then click [Yes] to open the program on the other side. When testing, the camera will first
inspect the position of two ID Mark points. Upon inspection of that ID Mark, the
corresponding program will be called for inspection.
8.6 Normal inspection operation
After entering AOI software, adjust the width of the track corresponding to its board, and then
adjust the lower right corner position of PCB board after the back rail and lower cover of
double track need to enter the board according to the method of new program. (Note: the
position of the lower right corner should be consistent with the position of the lower right
corner when editing the program, so that this program can inspect. )
Then click [Open] in [File Management] in the menu bar, as shown below;