Nellcor OXIMAX N-600X Series, Operator'S Manual

Page: 98 / 212

Using OXIMAX Sensor Event Records
90 N-600x Operator’s Manual
O
XI
M
AX
Sensor Event Record Data Available
When an O
XI
M
AX
sensor containing patient alarm data
(single-patient-use O
XI
M
AX
sensors only) is connected to the monitor,
the Sensor Event Record indicator on the monitor front panel blinks
at a medium priority flash rate to indicate that the
O
XI
M
AX
sensor
attached to the monitor contains patient event data. The LED blinks
for approximately 60 seconds or until the
O
XI
M
AX
sensor is
disconnected or until the sensor trend data is displayed by pressing
TREND, then SENSOR.
A corresponding “DATA IN SENSOR” message is also displayed at
the bottom of the display. After 4 to 6 seconds, if all the data has been
read from the
O
XI
M
AX
sensor, the message is replaced with the main
menu.
If data is still being read from the O
XI
M
AX
sensor after 4 to 6 seconds,
the DATA IN SENSOR message is replaced with a READING
TRENDS message which includes an ABORT option.
Selecting the ABORT softkey stops the recording, accessing or
viewing of additional data into the O
XI
M
AX
sensor.