Nellcor OXIMAX N-600X Series Operator'S Manual Download Page 58

Page: 58 / 212

Using the Monitor

N-600x Operator’s Manual

Turning the Backlight On or Off

You can turn off the backlight by pressing the LIGHT softkey and
then pressing OFF.

Note

: Any of the following conditions turn on the backlight:

•

pressing any of the softkeys

•

pressing and holding the HELP/CONTRAST button

•

pressing the ALARM SILENCE button

•

any alarm

Adjusting the Screen Contrast

1. With the monitor in the normal monitoring mode, press and hold

the HELP/CONTRAST button while pressing the ADJUST UP
or ADJUST DOWN button until the desired contrast is obtained.

2. Press the HELP/CONTRAST

button to return to the normal

monitoring mode.

Adjusting the Backlight Brightness

1. With the monitor in the normal monitoring mode, press the

LIGHT softkey.

2. Press the ADJUST UP or ADJUST DOWN button until the

desired backlight brightness is obtained.

Summary of Contents for OXIMAX N-600X Series





















































































































































































































Search results

Summary of Contents for OXIMAX N-600X Series

Reviews:

Related manuals for OXIMAX N-600X Series

Brands by name

Popular brands

Nellcor OXIMAX N-600X Series, Operator'S Manual

Search results

Summary of Contents for OXIMAX N-600X Series

Reviews:

Related manuals for OXIMAX N-600X Series

Brands by name

Popular brands