Nellcor OXIMAX N-600X Series, Operator'S Manual

Page: 48 / 212

Using the Monitor
40 N-600x Operator’s Manual
Parameter Ranges
The parameters of the N-600x monitor are preset to factory default
settings. See
Factory Default Settings on page 167. The factory
default parameters may be changed to institutional default parameters
by following the procedures in the
N-600x Service Manual .
Table 6 lists the parameters, ranges available, and the factory default
setting. The parameters may be set on an individual basis, by the
clinician, and these settings remain in effect until the monitor is
turned off.
Table 6: Parameter Ranges
Parameter
Ranges/
Selections Factory
Adult Defaults
Factory
Neonate
Defaults
%SpO
2
Upper Alarm
Limit
Lower Alarm
Limit plus 1 to
100% 100% 95%
%SpO
2
Lower Alarm
Limit
20% to Upper
Alarm Limit
minus 1 85% 85%
Pulse Rate
Upper Alarm
Limit Lower Alarm
Limit plus 1 to
250 bpm 170 bpm 190 bpm
Pulse Rate
Lower Alarm
Limit 30 bpm to Upper
Alarm Limit
minus 1 40 bpm 90 bpm
Alarm
Silence
Duration Alarms 30, 60,
90, 120 seconds 60 60
Alarm
Volume 1 to 10 7 7
Alarms
Allow Off
-
Yes/No
Off Reminder -
Yes/No
No
Yes
No
Yes