Nellcor OXIMAX N-600X Series, Operator'S Manual

Page: 68 / 212

Using the Monitor
60 N-600x Operator’s Manual
Selecting the Standby Mode
The standby mode enables the monitor to retain the alarm limit
settings that are in effect while monitoring a patient. The monitor
must be connected to an AC power source to enter the standby mode.
Normally, the standby mode setting is used when a patient has to
temporarily leave the monitor.
1. Verify the N-600x is monitoring a patient and the alarm limits are
configured to the patient being monitored.
2. Disconnect the sensor from the monitor.
3. Press the ALARM SILENCE button to silence the audible
alarms.
4. Press the ALARM SILENCE button to disable the alarm
messages.
The monitor is now in the standby mode. Reconnect the sensor to the
monitor and the patient to return to normal monitoring.