Nellcor OXIMAX N-600X Series, Operator'S Manual

Page: 96 / 212

Using OXIMAX Sensor Event Records
88 N-600x Operator’s Manual
Setting In-Sensor Data Type
The In-Sensor Data Type display enables you to adjust the type of
patient alarm event trend data to be recorded in an
O
XI
M
AX
sensor.
O
XI
M
AX
sensors can be set to record either SpO
2
or SpO
2
+BPM.
Note : The O
XI
M
AX
sensor data type can only be set when an O
XI
M
AX
sensor is not connected to the monitor.
1. With the monitor turned on and no cables attached to the SpO
2
O
XI
M
AX
sensor port, press the SETUP softkey.
2. Press the SENSOR softkey.
3. Press the DATA softkey.
Note : O
XI
M
AX
sensor data type settings are displayed on the monitor
as shown in the figure below (in-sensor data type). If no sensor is
connected, both sensor types and the full set of options for each are
displayed. If a sensor is connected, only the sensor data type for that
sensor displays.
Note: The SENSOR-R feature supports all the current O
XI
M
AX
sensors. The SENSOR-RW feature is only applicable to O
XI
M
AX
sensors with a read/write chip installed.