Mounting the Disk Array Unit into a Rack Cabinet
Unpacking the Rack Mounting Hardware
Although the rack mounting hardware is inspected and carefully packaged at the
factory, damage may occur during shipping. Follow these steps for unpacking.
1.
Visually inspect the shipping containers; notify your carrier immediately of any
damage.
2.
Carefully remove the rack mounting hardware and verify the parts (see Table 2-2).
If parts are missing or the hardware is damaged, notify your sales agent.
Table 2-2 Rack Mount Parts
Description Quantity
Fixed Rail Assembly
2 (L + R)
Rail Support
2 (L + R)
M5 Bolts
8
Before You Begin
Before you begin, please review the following warnings.
Be sure that power to the system is turned off and unplugged. All voltage is
removed only when the power cords are unplugged.
Avoid excessive vibration and shock. Dropping an electronic component can
cause serious damage.
Installing the Rail Assemblies to the Rack Cabinet
The following subsection describes how to install your rack-mount disk array unit into a
standard EIA 19-inch rack cabinet.
Before you begin select an appropriate location in your rack cabinet for the rack-mount
unit. To improve rack stability, mount heavier items towards the bottom of the rack
cabinet. If the rack is a stand-alone unit and the rack is more than 75% filled with
components, consider installing an optional stabilizer kit.
Note:
When planning your system configuration for the rack
cabinet you should consider the length of the cables that
interconnect system components.
Figure 2-3 shows how rail assemblies should be installed in the rack cabinet.
Setting Up the System
2-5
Summary of Contents for VERSA S1300 Series
