Chapter 9 Descriptions
UNIVERGE
NEAX
2000 IPS
Request for Proposal (RFP) Reference Guide
Page 9- 47
Issue 6
Wireless Feature Descriptions
Analog PBX Interface
This feature allows the WCS to be integrated
with many types of PBXs and to activate
various PBX services by sending hook flash
signal and DTMF tone.
Announcement - PS No Answer /
Announcement - PS Out of Zone
This feature allows calls to a Dterm PS III
which cannot be paged in a predetermined
period of time to be routed to the
announcement notifying the calling party that
the Dterm PS III cannot answer.
Announcements can be divided between
Announcement-PS No Answer and
Announcement-PS Out of Zone depending on
the Dterm PS III condition.
Automatic Release - Out of Zone Calls
When a Dterm PS III user engaged in a call
moves out of the service area or enters a
radio zone where all the channels are busy
and the communication becomes unavailable,
the call will be disconnected automatically,
and the other party receives reorder tone.
Call Forwarding-Not Available
When a Dterm PS III is powered off or out of
zone, a call directed to the Dterm PS III is
forwarded to a VMS, and a voice mail
message can be recorded to the VMS and
checked from the Dterm PS III. Also the VMS
can page the Dterm PS III automatically after
the voice mail message is recorded.
Call Forwarding - PS Out of Zone
This feature allows calls directed to a Dterm
PS III, which is power off or out of zone to be
routed to an another station, an Attendant, an
outside number or voice mail equipment. The
call forwarding destination can be set/
cancelled from the Dterm PS III station or
MAT/CAT.
CCIS Interface
This feature allows the WCS to be integrated
with NEC PBXs with CCIS interface.
Calling Name Display - PS
Without answering incoming calls or hold calls
terminates to the Dterm PS III, the calling
party’s name can be confirmed by the
indications on the LCD.
Calling Number Display - PS
This feature provides a display on the LCD of
a Dterm PS III receiving a call, indicating the
station number.
DTMF Signal Sender
This feature allows a Dterm PS III user to
send the DTMF signal (tone) to the called
party (terminal, voice mail system, etc.) while
engaged in communication.
Group Call-Automatic Conference (6/10-Party)
This feature permits a Dterm PS III user,
Multiline Terminal user or Single Line
Telephone user within the system to establish
a conference among as many as six or ten
parties. From a Dterm PS II/D term /Single
Line Telephone, a maximum of 9 PSs can be
paged simultaneously except the conference
leader. The PSs are assigned to the
simultaneous paging groups as participants
by the system data beforehand.
