Chapter 9 Feature Descriptions
Page 9- 16
UNIVERGE
NEAX
2000 IPS
Request for Proposal (RFP) Reference Guide
Issue 6
Data Line Security
This feature allows line circuits that are used
for data transmission to be protected from
interruptions such as Attendant Camp-On,
Executive Override, and Attendant Override.
Delayed Ringing
This feature enables trunks and station lines
to ring immediately at the terminating station,
but also, after a programmable period of time
has elapsed, to ring at secondary Multiline
Terminals with that trunk or line appearance.
Diagnostics
To assist maintenance personnel, the
U
NIVERGE
NEAX
2000 IPS provides diagnostic
capabilities such as fault code generation,
device status information and alarm
information recording which can be accessed
from the Maintenance Administration Terminal
(MAT) or Customer Administration Terminal
(CAT).
Dial By Name
This feature allows a Multiline Terminal user
to search for a desired number by name. The
number and name are registered in the
system and they are shown on Multiline
Terminal LCD. The Multiline Terminal user
can search for the desired number by name
using up or down soft keys. When the
Multiline Terminal user finds the desired
number, the call can be originated by pressing
the Line/Trunk key or going off hook.
Dial Conversion
The system can be assigned to use rotary
Dial Pulse (DP) or Dual Tone Multi-frequency
(DTMF) trunks and stations. This feature
provides for the repeating of digits dialed by
the station user onto the C.O. trunks.
Direct Data Entry
This feature allows a maid or other hotel
personnel to enter numeric data to the
Property Management System (PMS), using
the guest room station for entry through dial
operation. The same numerical data can be
output to a Hotel/Motel Printer by system data
programming.
Direct Digital Interface
This service feature provides the capability to
connect trunks from the
U
NIVERGE
NEAX
2000
IPS directly to T1 carrier links using either a
private or public network.
Direct Inward Dialing (DID)
This feature provides for incoming calls from
the exchange network (except FX or WATS)
to reach any station within the system without
attendant assistance.
DID Call Waiting
This feature allows an incoming call on a DID
trunk or a tie line to automatically be Camped-On
to the destination station if the destination station
is busy.
DID Digit Conversion
This feature allows the
U
NIVERGE
NEAX
2000 IPS
to convert the digits received from the serving
C.O. to valid station numbers when the C.O.
numbering plan differs from the desired station
numbering plan
.
DID Name Display
This feature allows name assignment for a DID
number received from a public network, and
displays the name on an LCD of a Multiline
Terminal or Attendant Console.
